You are here

Download Catalog

DOWNLOAD STUDEX EAR PIERCING RELEASE FORM HERE (PDF)

 

“State of the Art”

The most innovated and technologically advanced instrument. The “touch-free” ear piercing process highlights: safety, hygiene, and ease of use. The one piece cartridge gives smooth operation and ensures proper alignment of the stud with clasp. System 75 provides two instruments, for simultaneous piercing. This is especially important when piercing young children’s ears.

 

VISIBLE STUD AND POINT:

The stud is always visible-inside the sealed packaging and when loaded in the instrument- for ease of identification. The point of the stud is clearly visible in the cartridge for pin point accuracy when piercing.

 

ENHANCED HEALING:

Automatic positioning of the clasp ensures that proper space is left at the front and back of the ear to enhance the healing process.

ULTIMATE HYGIENE:

The system 75 cartridge is designed to be loaded in the instrument while still inside its sterile package providing touch free operation.

 

SURE GRIP:

The system 75 instrument is designed to fit comfortably in the hand for accurate piercing and perfect alignment every time.

 

HAND PRESSURE:

The patented design provides a gentle action for a quick, painless piercing. The ear is automatically pierced with a simple spring action trigger in one easy step.

 

EAR PIERCING INSTRUCTION

DOWNLOAD SYSTEM 75 EAR PIERCING MANUAL HERE (PDF)

DOWNLOAD STUDEX EAR PIERCING RELEASE FORM HERE (PDF)

 

PREPARING THE CUSTOMER

  1. Have the customer select the style of piercing stud they would like from the ear piercing stud sample board.

  2. Have the customer complete and sign the Release Form.

  3. Have the customer sit in the designated piercing area.

 

PREPARING YOURSELF

First, familiarize yourself with the System 75 piercing instrument and the packaged studs. It is very important that you present yourself as a confident, expert piercing technician to the customer. The more comfortable you are, the more at ease your customer will be. This will help the customer relax and relieve any anxiety they might be experiencing.

  1. Clean hands appropriately and put on gloves on both hands BEFORE proceeding with ear piercing.

  2. Check customer’s ears for cysts. Cysts are embedded skin tissue surrounding foreign debris. When you pinch the earlobe and feel small, hard lump that can be moved, it is probably a cyst. If you see and feel a small lump that does not move, it is most likely scar tissue. Cysts are not visible and can be moved, whereas scar tissue is visible and does not move. You may pierce through scar tissue, but never through a cyst as it may rupture, releasing debris into the surrounding tissue which can cause an infection.

MARKING THE EAR

1.

The customer should remove any earrings they are wearing.

Ask customer where they would like the new earring(s).

Cleanse the customer’s ears with the STUDEX Alcohol Prep Pads.

Mark the ear(s) with the Non Toxic Marking Pen (see illustration 1. above)

Have the customer check and approve the marks BEFORE proceeding with the piercing.

 

The customer should not touch the ear after cleansing.

CARTILAGE PIERCING

Special care must be taken when piercing through the cartilage (dark area at the right).

DO NOT PIERCE THROUGH THE CURLED “EDGE” OF THE CARTILAGE AREA!

Whenever piercing through the cartilage area of the ear, you must take care to

ensure the instrument is held perpendicular to the surface to the ear.

Pull the cartilage slightly to "unroll" it.This is to ensure that the ear piercing instrument ca be properly positioned.

IMPORTANT! Alert your client that the healing time for the cartilage area can take up to 12 weeks. Reinforce the fact that due to the nature of piercing the cartilage area, extra care should be taken to ensure proper after care is followed. At the first sign of pain, redness or swelling, advise them to seek medical attention immediately.

EAR PIERCING WITH THE HOOP

EAR PIERCING WITH STUDEX EAR PIERCING HOOP

When using the Ear Piercing Hoop, the positioning of the instrument and the location if the piercing are very important. The following instructions pertain only to the proper position of the hoop when ear piercing.

Special Procedure for Hoop Ear Piercing

- Follow the basic ear piercing procedure with following special considerations:

- Mark the ear ¼” from the outer edge of the ear. This placement is critical in order

for the hoop to give the appearance of a continuous hoop when rotated after piercing.

Cartilage piercing with Ear Piercing Hoop is NOT RECOMMENDED.

The hoop piercing must be positioned carefully to allow for the rotation of the hoop after piercing.

Rotate the free end of the hoop 180 Degrees.

The free end of the hoop should go behind the ear lobe.

 

LOADING THE CARTRIDGE

MAKE SURE THE INSTRUMENT IS CLEANED WITH ALCOHOL BEFORE AND AFTER EACH USE!

AFRESH SET OF DISPOSABLE GLOVES SHOULD BE SUED FOR EACH PIERCING PROCEDURE!

2.

Peel off the paper backing from one blister, exposing the piercing cartridge (2)

DO NOT REMOVE CARTRIDGE FROM THE BLISTER!

3.

Holding the sides of the plastic blister firmly with opening on the bottom (3),

slide the clasp end of the cartridge down and forward into the channel in the instrument until it is seated fully forward (4).

4.

5.

Rotate the back of the cartridge down into the channel until it is firmly seated. (5).

SNAP THE CARTRIDGE COMPLETELY DOWN TO SIT LEVEL WITH INSTRUMENT!

6.

Lift the plastic blister (6). Do not discard the plastic blister, as you will need it later.

DO NOT TOUCH THE CARTRIDGE, STUD AND CLASP WITH FINGERS AT ANY TIME!

PIERCING THE EAR

7.

Place the ear between the end of the earring (sharp point) and the clasp, carefully aligning point of the earring with the mark on the ear as shown (7). While maintaining proper alignment, slowly squeeze the handle. This will slide earring forward for more accurate positioning.

8.

Keep the proper alignment, squeeze handle firmly to pierce the ear (8). The clasp will be automatically installed on the earring post with proper spacing. Release pressure on the handle and carefully pull the handle down from the ear (9). This will release the earring from the clear plastic carrier and the clasp from the cartridge.


Remove the used cartridge from the handle using the saved blister and discard the cartridge and the blister. (10, 11 & 12).

Repeat this procedure for additional ear piercings with new cartridge.

No further adjustment for the clutch is needed after the piercing!

NOTE: When the piercing is complete, ask the customer f they are OK to stand up, or if they need a few minutes. If they stand up and feel dizzy, help them sit down, and have them wait 3-5 minutes before leaving.
AFTER PIERCING

DO NOT REMOVE THE EARRINGS during the 6 week healing period, or the holes will begin to close.

At least twice daily, clean the front and back of the ear with STUDEX After Piercing Lotion or Gel (A)

After cleansing, slide the earring back and forth to work the lotion into hole (B).

Keep soap, shampoo, perfume, hair spray and hair dye away from the new piercing.

After the healing period, other post earrings may be worn.

Heavy earrings should not be worn for at least 4 months after the healing period.

Should redness, pain or swelling occur seek medical attention immediately.

Do not remove studs until you have sought medical attention!

9.

Release pressure on the handle and carefully pull the handle down from the ear (9).

This will release the earring from the clear plastic carrier and the clasp from the cartridge.
REMOVING THE CARTRIDGE

Always use the blister as a holder when installing, removing or transporting cartridge. In this way, sterility of the piercing earrings and clasps is maintained, and accidental contact with the customer’s body fluids is avoided.

10.

After piercing, place plastic blister (the one that the cartridge cam in) down on top of the used cartridge as shown. (10).

11.

Firmly holding the sides of the blister as shown (11), slide the blister and cartridge slightly forward to release the cartridge from the channel.

12.

Lift the entire cartridge assembly straight up and out of the channel (12).

Dispose of the used cartridge and blister in the appropriate manner.

We offer retail tools and POS material to help you succeed!

7500-0028 - 14K Gold Selection Display

 

7500-0028-S - 14K Gold / Stainless Steel Display

 

7500-0012-ENG - Stainless Steel Selection

12 Styles

7500-0024-ENG - Stainless Steel Selection

24 Styles

SH01 - Floor Stand w/Ear Piercing Sign

 

R904-24 - Piercings Care Gel display - 24 pc

 

R910 - Realease Forms - 12 Pack

R900-STX - Alcohol Prep Pads - 100 pc in Box

R900-STX-12 - Alcohol Prep pads - 12 pc

R950S - Non Toxic Markin Pen

Vinil Gloves Box - 100 pc (S/M/L)

R941 - Practice Training Ear

1PKC - Brave Kid Certificate - 25 pcs

1FEPS-1 - Window Ear Piercing Sign

M1-STX - Hand Held Mirror

R901NA-STX After Piercing Lotion 4OZ - 24pcs

R904-STX - Studex Piercing Care Gel Carded

BR904-STX - Studex Piercing Care Gel